Logitech CRAYON Setup Manual page 2

Hide thumbs Also See for CRAYON:

PRODUCT SETUP

To start using Logitech Crayon, simply turn on and draw. No software downloads or pairing required. Here are some tips

to get started:

1. Make sure you are using iPad Pro 12.9-inch (3rd gen), iPad Pro 11-inch, iPad Air (3rd gen), iPad mini (5th gen),

or iPad (6th gen). These are the only devices that are compatible with Logitech Crayon.

2. Make sure iPad is updated to iOS 12.2 or above. To check your iOS version, go to iPad Settings → General → Software.

3. Disconnect any previously connected digital pencils, such as Apple Pencil

Settings → Bluetooth → Select the device you want to disconnect. If you do not want to forget other digital pencils,

simply turn your Bluetooth

4. Press the power button for 1 second. If the LED turns green, you're ready to go. If LED turns red, charge Crayon

before use.

SOFTWARE UPDATES

Updating the iOS on your iPad may affect your experience with Crayon. If you notice changes in functionality, simply follow

these steps:

1. Download Logitech Crayon software update at

2. Connect Logitech Crayon to laptop via lightning cable.

3. Follow the prompts to update software.

To get notifications about software updates, product tips, and more, visit

https://support.logitech.com/product/crayon-ipad/register

USE

Use with hundreds of Apple Pencil compatible apps, which are downloadable in the App Store. Logitech Crayon is not

pressure sensitive, so there is no need to press down hard on the iPad. Just tilt for thicker or thinner lines.

HOW TO CHARGE

1. Flip open the cap.

2. Insert lightning cable.

3. Connect cable to a power adapter or computer to charge.

It takes about 30 minutes to charge Crayon from 0 to 100%.

Note: Crayon will not work while charging.

Crayon Setup Guide

off before using Crayon.

https://support.logitech.com/product/crayon-ipad/downloads

, prior to using Crayon by going to iPad

English