Download Print this page

Logitech CRAYON Setup Manual

Hide thumbs Also See for CRAYON:

Download this manual

KNOW YOUR PRODUCT

Cap

Power button

Lightning port

PRODUCT SETUP

Make sure iPad iOS is updated

to version 11.4 or above

1. Press the power button for 1 second. The LED will turn green — ready to go.

2. If LED turns red, charge the pen before use.

LED Behavior

Fade in green

Fade out green

Solid green

Breathing green

Blinking red

Red when user presses button

Green when user presses button

Yellow

LOGITECH CRAYON

Setup guide

LED

Pen tube

Logitech Crayon status

Power on

Power o

Fully charged

Charging

Battery level is critical (less than 5%)

Battery level is low (less than 10%)

Battery level is good

Firmware update

Tip cover

Tip

Page 1 1. Press the power button for 1 second. The LED will turn green — ready to go. 2. If LED turns red, charge the pen before use. LED Behavior Logitech Crayon status Fade in green Power on Fade out green...
Page 2 CHARGING 1. Flip open the cap. 2. Insert lightning cable. 3. Connect cable to a power adapter or any computer to charge. 4. LED will turn green. REPLACING THE TIP COVER Find the removal tool. Align the tool with the two Squeeze the tool and pull o holes in the pen tube.
Page 3 REPLACING THE TIP Find the removal tool. Align the tool with the two Squeeze the tool and pull o holes in the pen tube. the tip cover. Twist the tip counter-clockwise Insert new tip and twist Insert new tip cover into pen to remove.