Table of Contents
Advertisement
Pin
Wire Color
Bare
Red
Black
White
Blue
HDMI Video Considerations
To prevent corrosion due to moisture, you must use Garmin
GPSMAP accessory cables when connecting the chartplotter to
the video source or display. Do not connect a media player stick
directly into the back of the chartplotter. Using different cables or
connecting a media player stick into the back of the chartplotter
voids your warranty.
This chartplotter allows video input from HDMI video sources,
such as a Chromecast
™
device or a Blu-Ray
view protected HDMI content (HDCP content) on the chartplotter
screen, but not on an external screen.
HDMI video is shared across the Garmin Marine Network, but it
is not shared across the NMEA 2000 network. HDCP content is
not shared across the Garmin Marine Network.
Through the HDMI OUT port, you can display the chartplotter on
an external screen, such as a television or monitor. You cannot
view HDCP content on an external screen.
The Garmin GPSMAP HDMI accessory cable is 4.5 m (15 ft)
long. If you need a longer cable, you should use an active HDMI
cable only. You need an HDMI coupler to connect the two HDMI
cables.
You need a Garmin GPSMAP USB OTG adapter cable to power
a media player stick. The USB port can supply up to 2.5 W to
power a media player stick.
You must make all cable connections in a dry environment.
Devices
Item
Device
HDMI source, such as a Chromecast device
GPSMAP chartplotter
Monitor, such as a computer or television
6
Description
Shield
Power, positive
Power, negative
CAN High
CAN Low
NOTICE
™
player. You can
Connections
From
To
HDMI source's HDMI
Chartplotter's HDMI IN
OUT port
port
Chartplotter's HDMI
Monitor's HDMI IN port
OUT port
Chartplotter's USB
HDMI source's USB
port
port
Composite Video Considerations
This chartplotter allows video input from composite video
sources using the port labeled CVBS IN. When connecting
composite video, you should observe these considerations.
• The CVBS IN port uses a BNC connector. You can use a
BNC to RCA adapter to connect a composite-video source
with RCA connectors to the CVBS IN port.
• Video is shared across the Garmin Marine Network, but it is
not shared across the NMEA 2000 network.
Touchscreen Controls for a Connected Computer
To prevent corrosion due to moisture, you must use Garmin
GPSMAP accessory cables when connecting the chartplotter to
the computer. Using different cables voids your warranty.
You can connect the chartplotter to a computer to see the
computer screen on the chartplotter touchscreen and control the
computer using the chartplotter touchscreen. To see the
computer screen, you must connect the computer to the HDMI
IN port. To control the computer, you must connect the
computer to the USB port.
The Garmin HDMI accessory cable (010-12390-20) is 4.5 m
(15 ft) long. If you need a longer cable, you should use an active
HDMI cable only. You need an HDMI coupler to connect the two
HDMI cables.
The Garmin USB accessory cable (010-12390-10) is 4.5 m
(15 ft) long. If you need a longer cable, you should use a USB
hub or USB repeater extension cable only.
You must make all cable connections in a dry environment.
Devices
Item
Device
Computer
GPSMAP chartplotter
Connections
From
To
Computer's HDMI OUT
Chartplotter's HDMI IN
port
port
Chartplotter's USB port
Computer's USB port
Cable
Garmin HDMI Cable
Garmin HDMI Cable
GPSMAP USB OTG
adapter cable to
power the HDMI
source, if possible
(2.5 W maximum)
NOTICE
Cable
Garmin HDMI
Cable
Garmin USB
Cable
Advertisement
Table of Contents
