Subscribe to Our Youtube Channel
Related Manuals for Marmitek W home TM13AU
Summary of Contents for Marmitek W home TM13AU
- Page 1 TM13AU TRANCEIVER MODULE 20151/20061012 • TM13AU™ TRANCEIVER MODULE ALL RIGHTS RESERVED MARMITEK/W HOME © 2006...
- Page 2 The address can be set either using code dials or by pressing buttons, depending on the type of module. The MARMITEK/W HOME X-10 System uses standard commands, which control all units with the same HouseCode at the same time (e.g.
- Page 3 TM13AU TRANCEIVER MODULE 5 EENNGGLLIISSHH • The KR22 wireless remote control (an attractive extra-slim remote control for operation of MARMITEK/W HOME X-10 Modules from a distance. Can be used as a key ring. Can be used to control three addresses + dimmer function.)
- Page 4 What is the reason for modules to switch on/off spontaneously? It is possible that a MARMITEK/W HOME X-10 System is installed at one of your neighbours using the same House Code. To solve this problem try to change the House Code of your system, or have FD10 Phase Coupler/Filter installed at your incoming mains.
Need help?
Do you have a question about the W home TM13AU and is the answer not in the manual?
Questions and answers