Marmitek LM12AU User Manual

Lamp module

Advertisement

LM12AU
LAMP MODULE
20136/20060922 • LM12AU
APPLIANCE MODULE
TM
© ALL RIGHTS RESERVED MARMITEK/W HOME®2006
14BRUIKSAANWIJZING 18
2 © MARMITEK/W HOME

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM12AU and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Marmitek LM12AU

  • Page 1 LM12AU LAMP MODULE 20136/20060922 • LM12AU APPLIANCE MODULE © ALL RIGHTS RESERVED MARMITEK/W HOME®2006 14BRUIKSAANWIJZING 18 2 © MARMITEK/W HOME...
  • Page 2 Marmitek/W Home does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek/W Home does not accept responsibility for additional damage other than covered by the legal product responsibility.
  • Page 3 What is the reason for modules to switch on/off spontaneously? It is possible that a Marmitek/W Home X-10 System is installed at one of your neighbours using the same House Code. To solve this problem try to change the House Code of your system, or have FD10 Phase Coupler/Filter installed at your incoming mains.
  • Page 4: Technical Data

    3. Plug the Module into a wall outlet. You are now able to control your Module with any Marmitek X-10 Controller. It is also possible to control the Module locally. Just switch the regular switch off and on shortly and the lamp will come on (auto sense function).

Table of Contents