Advertisement
Operation
Load the battery
Be sure while loading the batteries that
these are in line the "+"/"-" pole request
as illustrated.
Put on the cover again Confirmation
indicator
In disorderation, reload the batteries or
load the new batteries after 5 mins.
Note:
Use two new same-typed batteries
when loading.
If the remote controller con't run
normally or doesn't work at all, use a
sharp pointed item to press the
reset key.
Hints
Remove the batteries in case unit won't
be in usage for long period. If there are
any display after taking-out just need to
press reset key.
11
Operation
Auto run, Fan operation
Enjoy yourself by just a gentle press.
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display.
(Not Timer setting)
Power indicator on indoor unit lights up.
(2) Select operation mode
Press MODE button for each press, operation
mode changes as follows:
AUTO
COOL
DRY
HEAT
FAN
Unit will run in selected mode
Stop display at " " AUTO or " " FAN.
FAN " " AUTO
(3) FAN
Press FAN button. For each press, fan speed
changes as follows:
LO
MED
HI
AUTO
AUTO
Unit will run at selected fan speed.
Note: AUTO is not available in FAN mode.
Adjust air flow direction if necessary, referring to
page 20.
12
(1)
(2)
" "
(3)
Hide quick links:
Advertisement
