Skyleader 600 Pilot Operating Handbook page 83

The whole complex is designed so that both of the flaps slides simultaneously, therefore it is impossible that the
slide will be not on an even keel.
Flap effect is compensated by deflection of lift-side trim surface. The lef-side trim surface is
Flap effect is compensated via deflection of lift-side trim surface. The lef-side trim surface is automaticaly deflected
according to actual flap position.
Operation
The flaps control lever is used for opening and retracting flaps. If the flaps lever is down, flaps are retracted. For
moving the flaps, unlock the lock lever (situated under the flaps lever) by moving ahead and than move flaps lever to
selected position. The flaps position for takeoff is in the middle of the range of the flaps lever move. The flaps position
for landing is situated on the upper end of the range. For retracting the flaps unlock the lock lever (by moving ahead)
and than move the flaps lever to selected position.
Flaps lever
Unlock
Lock
automaticaly deflected according to actual flap position.
RETRACTED
Lock lever
TAKEOFF
LANDING
83