Chapter 4: Mps-482Hp Mounting Accessories; Optional Accessories - Meyer Sound MPS-482HP Operating Instructions Manual

CHAPTER 4: MPS-482HP MOUNTING ACCESSORIES

OPTIONAL ACCESSORIES

Meyer Sound offers two optional accessories to increase
mounting flexibility:
MUB-MPS-482HP U-Bracket: Enables mounting of one
•
MPS-482HP power supply remotely on a ceiling, wall, or
pole (using third-party pole mount). Users can hang the
power supply below the bracket, or mount the power
supply on top. The bracket above power supply
orientation provides space for cable routing. The
enclosure design includes cable routing strain relief tabs.
The bracket accommodates M6 fasteners.
MUB-MPS-482HP U-Bracket
Strain-relief,
cable-routing
tabs
Cable-routing
space provided
under bracket
MUB-MPS-482HP U-Bracket cable routing
RMT-MPS-482HP Rack Mount Tray: Allows mounting of
•
one or two power supplies on a standard EIA 19-inch
wide rack. The 2RU tray height facilitates cooling of the
MPS-482HP power supply, as the area above the unit is
empty. The rack mount tray comes with one face tray
cover to use if one side is left empty.
RMT-MPS-482HP Rack Mount Tray
Rear view of Rack Mount Tray with right face cover in place
MPS-482HP OPERATING INSTRUCTIONS
17