Advertisement
Information for your safety
Please read all the following information, which
contains important instructions for the safety, the
use and the maintenance of the appliance.
This appliance complies with the following EC
Directives: -73/23/EEC, 93/68/EEC-Low Voltage
Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance unsu-
pervised.
Do not use the appliance If the mains lead is
damaged or faulty.
If the mains lead is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
Always switch the vaccum cleaner off before :
• changing the dust bag.
• changing or cleaning the filters.
If no dustbag is inserted, the cover cannot be
closed. Please do not use force!
Do not vacuum flammable or explosive sub-
stances(liquids or gases).
Do not vacuum hot ash, embers etc. nor sharp
objects.
Do not vacuum water or other liquids.
When you vacuum with an attachment appli-
ance that has a rotating brush roller:
• do not reach into the running brush roller.
The application is not intended for use by young
children or infirm persons without supervision.
How to Use
Connecting the flexible hose
Push the end of the head(1) on the flexible
hose(2) into the attachment point on the vacuum
cleaner.
To remove the flexible hose from the vacuum
cleaner, press on the Hook(3) situated on the
head, then pull upwards.
Assembling the tubes
Fit the grip handle onto the end of the telescopic
tube.
• Telescopic tube(4)
- Hold spring latch(5).
- Pull out the tube to required length.
- Release spring latch to lock.
Using the cleaning head and Accessory
Nozzles
Fit the large cleaning head onto the end of the
tube.
• The 2 position head(6) is equipped with a
pedal(7) which allows you to alter its position
according to the type of floor to be cleaned.
- Hard floor position(tiles, parquet floors...).
Press on the pedal to lower the brush.
- Carpet or rug position.
Press on the pedal to lift the brush up.
• Elbow tube(8)
Elbow tube is for cleaning under the sofa,
table and bed easily.
• Connect the elbow tube to the flexible
hose and, connect the telescopic tube to
the elbow tube. (You can also connect the
telescopic tube to the flexible hose without
the elbow tube.)
• If you pull the spring latch, the elbow tube
is bended.
• If you stretch the elbow tube, it is returned
to its position.
• Turbine brush nozzle (9)
• Dusting Brush(12)
Dusting Brush is for vacuuming picture frames,
furniture outlines, books and other uneven
objects.
• Crevice Tool(10)
Crevice Tool is for vacuuming in those normally
inaccessible places i. e. reaching cobwebs, or
down the side of a sofa.
• Upholstery Nozzle(11)
For vacuuming uphostery, mattresses, etc. The
thread collectors help to pick up the threads and
fluff.
How to plug in and use
• Pull out the power cord to the desired length and
plug into the socket.
• The flexible hose handle has a manual air flow
regulator(14) with allows you to briefly reduce
the suction level.
• Press the cord reel button(13) to retract the
power cord after use.
Electronic power control(15)
- Press the "ON -OFF" button(28)
(The lamps of three are on, indicate the power is on)
- Press the "CURTAIN" button in using minimum
suction power mode.
- Press the "CARPET" button in using maximum
suction power mode.
- The suction level, which is decreased by collected
dusts in the dust bag, would be maintained in a
proper level if you press the "AUTO" button
- Press "CURTAIN" or "CARPET" buttons to
stop the auto mode.
- 5 -
Advertisement
