Page 1
V-CC202N** This information contains important instructions for the safe use and maintenance of the vacuum cleaner. Especially, please read all of the information on page 4,5 for your safety. Please keep this manual in an easily accessible place and refer to it anytime. 3828Fi2872E...
Table of contents Important safety instructions ................4~5 How to use .........................6 Assembling vacuum cleaner....................6 Operation vacuum cleaner ....................8 How to operate ......................8 Indicator.........................8 Park mode ........................8 Storage ..........................8 Using carpet and floor nozzle ....................9 All accessaries could be only used with assembling into grip handle .........10 Emptying dust chamber.......................11 Cleaning air filter........................12 Cleaning exhaust filter ......................13...
Personal injury or product damage could result. In these • Disconnect electrical supply before servicing or cases, contact LG Electronics Service Agent to avoid hazard. cleaning the unit or when cleaner is not in use. • Do not use vacuum cleaner if it has been under water.
Page 5
If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. If the vacuum cleaner still does not run, contact a qualified LG authorised Service Agent. 3828Fi2872E...
How to use Assembling vacuum cleaner Hose handle Spring latch Telescopic pipe Carpet and floor nozzle Telescopic pipe Push the nozzle into • Push telescopic pipe firmly into hose handle. the telescopic pipe. • Grasp the spring latch to expand. •...
Page 7
Fitting pipe Flexible hose Indicator Attachment point SWITCH BUTTON Button Connecting the hose to the vacuum cleaner Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner.
How to use Operation vacuum cleaner Cord reel button Switch button Indicator Regulator Plug Open Close How to operate Indicator Park mode Storage • Pull out the power cord to • The indicator is • To store during • When you have the desired length and plug lighted on when the vacuuming, for...
How to use Using carpet and floor nozzle Pile Adjustment Pedal Long Pile Short Pile Carpet and floor nozzle Air turbine brush • The 2 position cleaning head • Slide the pile adjustment to the right for equipped with a pedal which allows long pile and to the left for short pile.
All accessaries could be only used with assembling into grip handle Upholstery nozzle Dusting brush Crevice tool Upholstery nozzle Dusting brush Crevice tool Upholstery nozzle is for Dusting brush is for Crevice tool is for vacuuming upholstery, vacuuming picture frames, vacuuming in those mattresses etc.
How to use Emptying dust chamber Air filter Frame Dust chamber cap Indicator Dust chamber Plate Button The dust chamber needs emptying when indicator light is on or suction power is weakened. • Turn off the vacuum cleaner and unplug it. •...
• Open the dust chamber cap. If filters are damaged, do not use them. • Remove the filters by rotating it counterclockwise. In this cases, contact LG Electronics Service Agent. • Clean the filters with the dusting brush under cold running water.
How to use Cleaning exhaust Filter Exhaust Filter Cover White side up • The exhaust filter is a washable and reusable HEPA filter. • To clean the exhaust filter, remove the exhaust filter cover on the body by rotating it counterclockwise. •...
What to do if your vacuum cleaner does not work Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working. What to do when suction performance decreases • Turn off the vacuum cleaner and unplug it. •...