Section 12 - Capturing Screens And Emailing Mini-Reports; Capturing Screens - Radiodetection RD1500 Operation Manual

Ground penetrating radar with ultra wide band antenna

Hide thumbs Also See for RD1500:

Table of Contents

Capturing Screens and Emailing mini-reports

Section 12 - Capturing Screens and

Emailing mini-reports

If you would like to save an image of the current screen in Line Scan, Grid Scan, Slice View or

Map View, press the Camera button on the Display Unit. This saves the screen as a Screenshot

image (.JPG), which you can view in your preferred viewing software. If any GPS is enabled, the

screenshot image (only for Line Scan and Slice View screens) will also contain a geo-tagged

reference.

If you are not connected to a WiFi network, a message appears confirming the filename of the

saved image (Figure 12-1).

Figure 12-1: Message displayed after pressing the camera button on the Display Unit to capture

the screen (no WiFi present).

If you are connected to a wireless network and have a sending email address configured, you

will see the message in Figure 12-2, asking if you would like to email the screenshot and prompt

you to enter the email address. The email address defaults to the last one entered. Pressing the

"..." button to the left of the email address displays the last 5 email addresses used, allowing

you easily to select a recent email, rather than having to re-enter it.

Screenshots can always be emailed at a later time from the Screenshot Gallery (see

Screenshot Gallery in Section 6.3 for details).

RD1500 Operation Manual

Table of Contents