Porsche Connect Driver Manual page 28

Hide thumbs Also See for Connect:
Table of Contents

Advertisement

Porsche Connect App
A
1. In the Porsche Connect App main area select
My Car.
B
2. Move down in the menu by swiping vertically
C
(Charging details).
D
3. Select Manage timer e Edit.
E
4. Edit the required timer with
F
5. Configure settings.
G
– Repeat: Timer operates on each selected
weekday at the same time. Otherwise a set
H
timer operates once at the desired time.
I
– Precool/heat: Precooling/heating can be
selected when charging.
J
The temperature from Air conditioning is
K
used. Please refer to chapter "Klima" on
page 24.
L
6. Select Save.
M
A set timer is activated and the vehicle will be
N
charged at the required time.
O
Information
P
The timer uses the time set in the vehicle not the
Q
time set on the mobile phone.
R
S
Activate timer (E-Control)
T
An already set timer can be activated. If the timer is
activated, the vehicle is charged up to the pro-
U
grammed time, provided that a vehicle plug is con-
nected to the charge port. As an option, the vehicle
V
can also be precooled/heated to a predefined tem-
W
perature range.
b b Charging equipment connected.
X
b b Remote access authorisation is granted in the
Y
PCM.
Z
26
> Please refer to chapter "Granting remote ac-
cess authorisation" on page 4.
b b Timer set.
1. In the Porsche Connect App main area select
My Car.
2. Move down in the menu by swiping vertically
.
(Charging details).
3. Select Manage timer.
4. Activate the timer via the checkbox.
A set timer is activated and the vehicle will be
charged at the required time.
Display range
1. In the Porsche Connect App, select My Car
main area.
2. Move down in the menu by swiping vertically
(Range).
Display range on the map
1. In the Porsche Connect App, select My Car
main area.
2. Move down in the menu by swiping vertically
(Range).
3. Select Show map.
4. Show the range via the slide control.
Porsche Vehicle Tracking System (PVTS)
The functions of the Porsche Vehicle Tracking Sys-
tem (PVTS) can be remotely activated/deactivated
using the Porsche Connect App.
The following special modes are available:
– Service mode: When the mode is activated, no
theft alarm is triggered if the vehicle is being
serviced (e.g. battery is disconnected).
– Transport mode: When the mode is activated, no
theft alarm is triggered if the vehicle is moved
with the ignition switched off (e.g. on a ferry).
– Disarmed mode (PVTS Plus): When the mode is
activated, monitoring of the Driver Card is deac-
tivated so that a missing Driver Card no longer
triggers an alarm.
NOTICE
Please use these functions carefully.
e Activation of the special modes temporarily re-
stricts the security of your vehicle.
PVTS or PVTS Plus depends on the vehicle
equipment.
Information
– The Porsche Vehicle Tracking System (PVTS)
vehicle equipment (with or without Driver Card)
is affected by the insurance and legal require-
ments in the relevant country.
– For further information on the Porsche Vehicle
Tracking System (PVTS), please refer to the
separate Driver's Manual.
Switching special mode on and off
b b Remote access authorisation is granted in the
PCM.
> Please refer to chapter "Granting remote ac-
cess authorisation" on page 4.
b b The security code was assigned in My Porsche.
> Please refer to chapter "Security code" on
page 3.

Advertisement

Table of Contents
loading

Table of Contents