Porsche Connect Driver Manual page 27

1. In the Porsche Connect App My Car main area,
select e Air conditioning. Seat heating/seat
ventilation can be switched on or off by tapping
the respective buttons.
Seat heating/seat ventilation is started imme-
diately and adopts the last temperature set in
the vehicle.
Manage timer (air conditioning)
Using this function, the vehicle's timer-controlled air
conditioning can be managed. The vehicle attempts
to establish the set climatic conditions at the set
time. The passenger compartment can thus be
heated or cooled. The planned precooling/heating of
the vehicle using the timer is also performed when
the vehicle plug is not connected to the charge port.
A timer can be configured and saved.
b b Battery is sufficiently charged.
b b Remote access authorisation is granted in the
PCM.
> Please refer to chapter "Installing & using" on
page 3.
1. In the Porsche Connect App, My Car main area,
select e Air conditioning
2. Select Manage timer.
3. Make settings.
– Repeat: Timer operates on each selected
weekday at the same time. Otherwise a set
timer operates once at the desired time.
4. Select Save.
A set timer is activated and the vehicle will be
precooled/heated at the required time. The
temperature will then be sustained for 10
minutes.
The temperature can be set under My Car e Air
conditioning using the slider in the footer.
Information
The timer uses the time set in the vehicle not the
time set on the mobile phone.
Activate timer (air conditioning)
Using this function, an already set timer can be ac-
tivated. The planned precooling/heating of the ve-
hicle is also performed when the vehicle plug is not
connected to the charge port.
b b Battery is sufficiently charged.
b b Remote access authorisation is granted in the
PCM.
> Please refer to chapter "Installing & using" on
page 3.
b b Timer set.
> Please refer to chapter "Manage timer (air con-
ditioning)" on page 25.
1. In the Porsche Connect App My Car main area,
select e Air conditioning.
2. Activate the timer via the slide control.
A set timer is activated and the vehicle will be
precooled/heated at the required time (time in
the vehicle). The temperature will then be sus-
tained for 10 minutes.
The temperature can be set under My Car e Air
conditioning using the slider in the footer.
E-Control
Using the Porsche Connect App, you can remotely
control the charging process for your vehicle and
display the current status.
Porsche Connect App
Information
For further information on the high-voltage battery
charging process, please refer to the separate Driv-
er's Manual.
Immediate start (E-Control)
The charging process can be started immediately.
b b Charging equipment connected.
b b Remote access authorisation is granted in the
PCM.
> Please refer to chapter "Granting remote ac-
cess authorisation" on page 4.
1. In the Porsche Connect App, select My Car
main area.
2. Move down in the menu by swiping vertically
(Charging details).
3. Select Start charging.
The charging process is started immediately.
Manage timer (E-Control)
Timer-controlled charging for the high-voltage bat-
tery can be managed using this function. As an op-
tion, the vehicle can also be precooled/heated to a
predefined temperature range.
Three timers can be configured and saved.
b b Charging equipment connected.
b b Remote access authorisation is granted in the
PCM.
> Please refer to chapter "Granting remote ac-
cess authorisation" on page 4.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
25