Porsche Connect Driver Manual page 26

Porsche Connect App
A
1. In the Porsche Connect App, select My Car
main area.
B
2. Move down by swiping vertically (Alarms and
C
Modes).
D
3. Select Change settings.
E
4. Select Location.
F
Geographical areas can be added and activated via
the Add alarm function.
G
Stored geographical areas can be edited or deleted
H
via the Edit function.
I
Information
J
Changes to limit settings affect all app users that
K
access the same vehicle.
L
M
Speed Alarm
N A limit speed is specified. If this limit speed is ex-
ceeded, an alarm message is sent.
O
b b Remote access authorisation is granted in the
P
PCM.
> Please refer to chapter "Installing & using" on
Q
page 3.
R
1. In the Porsche Connect App, select My Car
S
main area.
T
2. Move down by swiping vertically (Alarms and
Modes).
U
3. Select Change settings.
V
4. Select Speed.
W
Limit speeds can be added via the Add alarm func-
X
tion. One of the added limit speeds can be activated.
Y Stored limit speeds can be edited or deleted using
the Edit function.
Z
24
Valet Alarm
The Valet Alarm is a preconfigured and therefore
rapidly activatable combination of the Location and
Speed Alarm.
b b Remote access authorisation is granted in the
PCM.
> Please refer to chapter "Installing & using" on
page 3.
1. In the Porsche Connect App, select My Car
main area.
2. Move down by swiping vertically (Alarms and
Modes).
3. Select Change settings.
4. Select Special.
As soon as the vehicle drives faster than the pre-
determined limit speed or crosses the specified
geographical boundary during valet parking, a noti-
fication is sent.
The Valet Alarm can be activated and deactivated.
Air conditioning
The vehicle's precool/heating function can be oper-
ated remotely using the Porsche Connect App. When
precool/heat is switched on, an air flow animation is
played. Advanced settings can be made using the
Preconditioning menu and, depending on the vehicle
equipment, air-conditioning can be activated in
specific zones.
The availability of the function depends on the ve-
hicle type and configuration. Further information is
available from your Porsche partner.
Immediate start (air conditioning)
Precool/heat can be activated and deactivated
immediately.
b b Battery is sufficiently charged.
b b Remote access authorisation is granted in the
PCM.
> Please refer to chapter "Granting remote ac-
cess authorisation" on page 4.
1. In the Porsche Connect App My Car main area,
select e Air conditioning.
2. Select Start.
The air conditioning is immediately switched on
and adopts the last temperature set in the ve-
hicle. Air conditioning stops after 30 minutes.
The temperature can be set under My Car e Air
conditioning using the slider in the footer.
Information
– Air flow and air distribution are regulated auto-
matically, irrespective of which settings were
active when the vehicle was parked.
– The precool/heat function in your vehicle is only
activated when the high-voltage battery is suffi-
ciently charged. For further information on the
high-voltage battery charging process, please
refer to the separate Driver's Manual.
– Please note that the charge status of the high-
voltage battery can be reduced or the charging
process delayed by precooling/heating.
Seat heating/seat ventilation
Seat heating/seat ventilation can be started and
stopped immediately.
b b Battery is sufficiently charged.
b b Remote access authorisation is granted in the
PCM.
> Please refer to chapter "Granting remote ac-
cess authorisation" on page 4.