Advertisement
OPERATING THE ODOROX® MDU/RX™ UNIT
POWER ON
The main power for the MDU/Rx™ Unit can be switched on by turning the MAIN POWER switch to the
ON position.
POWER OFF
The main power for the MDU/Rx™ Unit can be switched off by turning the MAIN POWER switch to the
OFF position.
FAN SPEED
The MDU/Rx™ Unit is equipped with an air mover fan, which is designed to deliver 150 cubic feet per
minute (254.8 cubic meters per hour).
In order for the fan to turn on, the MAIN POWER switch must be in the ON position.
PROCESSOR
The MDU/Rx™ Unit is equipped with two hydroxyl generating optics. In order for the optics to turn on,
the MAIN POWER switch must be in the ON position.
Two blue LED indicators are located next to the MAIN POWER switch to provide optic status to the
operator. While the optics are functioning normally, the blue LED indicators will be illuminated (see
TROUBLESHOOTING GUIDE for recommendations when indicators are not illuminated with the unit in
the ON position).
HOUR METER
The MDU/Rx™ Unit is equipped with a digital meter that monitors the hour usage of the unit. This is
beneficial for monitoring the life of the optics, length of treatment time, maintenance and cleaning
cycles.
6
Advertisement
