Performance Specifications - IDEC SE1L Manual

SE1L
Safety Laser Scanner

Performance Specifications

Part No.
Applicable Standards
Type
Safety Integrity Level
Safety
Performance
Performance Level
Category
Protection Zone
Warning Zone
Additional Safety Distance (Note 1)
Sensing Characteristics
Sensing Angle
Sensing
Characteristics
Minimum Sensing Width
Scan Cycle
Area
Response Time
Power Voltage
Normal (without output load)
Power
Maximum (without output load)
Consumption
Maximum (with output load)
PFHd (Note 2)
OSSD1/2 (safety)
WARNING1 (non-safety)
Output
WARNING2/ERR/MUT_OUT
(non-safety)
READY/RES_REQ
(non-safety)
Number of Inputs
Input
Input Resistance
Cable
Light Source
Operating Conditions
Surrounding Light Intensity (Note 3)
Vibration Resistance
Shock Resistance
Dimensions
Weight (approx.)
Degree of Protection
Material
Cable
Interface Structure
Cable Length
Note 1: Additional distance of 200 mm is needed when the SE1L operates under high reflective background.
Note 2: Probability of failure per hour
Note 3: The angle between the sensing plane and the light source should be more than 5 degrees.
6
IEC/EN 61496-1 (TÜV SÜD), IEC 61496-3 (TÜV SÜD, UL Listed),
IEC 61508 Part 1-7 (TÜV SÜD, UL Listed), IEC 62061 (TÜV SÜD),
EN ISO 13849-1 (TÜV SÜD), ISO 13849-1 (UL Listed), IEC 60825-1 (TÜV SÜD),
EN 50178 (TÜV SÜD), EN 55011 (TÜV SÜD), UL 508 (UL Listed),
ANSI/UL 1998 (UL Listed), UL 61496-1 (UL Listed), CSA C22.2 No. 14 (c-UL listed)
Type 3 (IEC 61496-1, IEC 61496-3, UL 61496-1)
SIL 2 (IEC 61508, IEC 62061)
PL d (EN ISO 13849-1, ISO 13849-1)
Category 3 (EN ISO 13849-1, ISO 13849-1)
2.0m maximum
10m maximum (non-safety)
+100 mm
Black reflector sheet (1.85%) to retro-reflector sheet
Speed: 1.6 m/s max.
190°
ø30 mm (maximum distance: 1.0m)
ø50 mm (maximum distance: 1.5m)
ø70 mm (maximum distance: 2.0m)
30 ms (rotating speed 2,000 rpm)
16 patterns
OSSD output ON OFF: 60 to 510 ms
OSSD output OFF ON: 270 to 510 ms
24V DC ±10%: power from converter
24V DC −30%/+20%: power from battery
11W (Typ.)
19W
58W
7.5×10
-8
Output type (High side SW)
Output current (maximum: 500 mA)
Leakage current (maximum: 1 mA)
Cable (length: 20m AWG 26)
Allowable load (L/R=25 ms C=1 F)
Output type (PNP transistor output)
Output current (maximum: 100 mA)
Leakage current (maximum: 1 mA)
Cable (length: 20m AWG 28)
Output type (PNP transistor output)
Output current (maximum: 100 mA)
Leakage current (maximum: 1 mA)
Cable (length: 20m AWG 28)
Output type (PNP transistor output)
Output current (maximum: 100 mA)
Leakage current (maximum: 1 mA)
Cable (length: 20m AWG 28)
16 area switching (4 inputs × 2 channels)
EDM (external device monitoring) / RESET / MUTING1 / MUTING2 /OVERRIDE
(1 input × 1 channel)
4.7k
Cable length: 20m AWG 28
Pulse laser diode (wavelength: 905 nm)
Laser class 1 (IEC 60825-1, 21 CFR Part 1040.10 and 1040.11)
Operating temperature: −10 to +55˚C (no freezing)
Storage temperature: −25 to +70˚C (no freezing)
Operating humidity: max. 95% RH (no condensation)
Storage humidity: No freezing and condensation
3000 lx maximum
Frequency: 10 to 55 Hz Sweep: 1 octave/minute
Amplitude: 0.35 mm ±0.05 mm
Acceleration: 98 m/s (10G) Pulse duration : 16 ms
2
97.0H × 90.0W × 99.8D (mm)
1.0 kg
IP65 (IEC 60529)
Body: Aluminum diecast / Optical window: Polycarbonate
Flying cable and waterproof connector / cable 300 mm / M16-19p
USB2.0 (USB mini B type connector)
Cable length: 20m maximum AWG 22, 26, 28
SE1L-H02LP
(14/04/28)