Advertisement
INSTALLATION OF THE HORIZONTAL AIR/FLUE DUCT (REAR OUTLET)
(TURBOMAX AND THERMOCOMPACT ONLY)
Fig. 3.11
20
1
5
For thermoCOMPACT 620, 624, 628,
turboMAX pro 24, 28, turboMAX plus
824, 828:
• Refit the collector hood (1).
Remove blank and refit funnel.
• Reconnect the electrical cables to
the fan.
• Gently push the flue duct
downwards to the left.
• Slide the fan (2) into position on
flue collector hood (3). Ensure that
the flue gas connector (5) engages
over the end of the flue duct and
the flange on the back of the fan
plate locks in to the collector
hood.
3
• Secure the fan to the flue collector
4
hood using only one screw (4).
2
• Reconnect the air pressure tubes to
4
the fan, ensuring that the air tubes
are connected to the correct
nipple.
Note: Blue tube connects to the rear
most fan outlet spigot.
• On combustion chamber cover
front swap top left hand rubber
bung with the metal hole bung.
• Reassemble the boiler in reverse
order.
• Complete the installation as
detailed in the boiler Installation
and Servicing instructions.
Advertisement
