Safety Instructions - SATA air star F Operating Instructions Manual

2. Safety Instructions

Read and comply with all directions listed in the following. Non-compli-
ance or incorrect compliance can lead to malfunctions or severe injuries
and even death.
Before using the PPE breathing protection equipment, every user is
obliged to check the capacity of the air supply system, possibly also in
terms of the impact on other users of the system.
The code "H" indicates that the compressed air feed tube is heat-resist-
ant. The code "S" indicates that the compressed air feed tube is antistatic.
Before operation, the user must proceed with a risk assessment regarding
possible harmful components in the workplace, e.g. nitrogen.
2.1. Requirements regarding personnel
The half mask may only be used by experienced skilled workers and
instructed persons who have thoroughly read and understood these oper-
ating instructions. Do not use the half mask when tired or under the influ-
ence of drugs, alcohol or medication.
2.2. Personal Protection Equipment
The half mask offers highly effective health protection during paint spray-
ing work and associated jobs in environments that pose a health risk. The
half mask is part of the personal protective equipment PPE in combination
with protective boots, protective overalls, protective gloves, and hearing
protection if necessary.
2.3. Use in explosive atmospheres
Danger!
Danger to life from explosion
When using the half mask in potentially explosive atmospheres of ex-
zone 0, it is possible for an explosion to occur.
→ Never bring the half mask into potentially explosive atmospheres of
ex-zone 0.
The half mask is approved for use / storage in explosive atmospheres of
ex-zone 1 and 2.
Zone code:
Ex II 2 G T4
EX
Operating Instructions SATA air star F
EX symbol
EN
83