Transmission Display - Doosan Mega 500-V Operation And Maintenance Manual

TRANSMISSION DISPLAY

A transmission display is to the left of the
steering wheel on the dash. The LCD indicates,
gears, direction of travel, error codes, and
activated kick-down.
Figure 43, shows the transmission display in
detail.
A. Indicates travel
selection. See Figure 44 for more detailed
information.
B. Indicates normal operation and error
codes. For a list of error codes see
"Transmission Error Codes" on page 6-6.
NOTE: Most codes are only two digits.
C. Indicates that error codes have occurred
and are stored.
D. Indicates that operation must be stopped
immediately to
transmission and hazardous operating
condition.
The gear range indicator bars will indicate which
gear is selected by displaying the corresponding
number of bars. The forward and reverse
indicator bars will
transmission is in "MANUAL MODE."
When transmission is in "AUTOMATIC MODE,"
all the gear range indicator bars and both travel
direction indicators will be "ON."
022-00029AE Operation and Maintenance Manual
direction and gear
prevent damage
be "OFF" when
Figure 42
(D )
Figure 43
to
the
Figure 44
(A ) (B )
FORWARD
INDICATOR
GEAR RANGE
INDICATOR BARS
REVERSE
INDICATOR
Operating Controls 2-21
AQO0130L
(C )
AQO0140L
HAAA3774