Belkin F1DN102FLP-DP-3 Quick Installation Manual

Quick Installation Guide
2 Port Secure Single/Dual-Head DP-DP FLIP KVM Switches
Objectives
• This guide includes instructions for installing Belkin F1DN102FLP-DP-3 and F1DN202FLP-DP-3 FLIP KVM Switches.
• A FLIP KVM is a compact form factor KVM that allows sharing keyboard, video, mouse, and audio peripherals between two computers.
• This Manual and additional product documentation is available for online download on the Belkin website. For further assistance please refer to:
http://www.belkin.com/us/Resource-Center/Cybersecurity/Secure-KVM-Switching/.
General
• Verify that all peripherals and computers are turned OFF prior to
connecting them to the product.
• The KVM is divided into sections. Computers connect to the molded
cables and the peripherals connect to the front panel.
– Connect the peripherals to be shared by the KVM to the Console
Ports.
– Connect each computer that needs access to shared
Before Installation:
• Before opening product packaging, inspect the packaging seal condition
to assure that product was not accessed or tampered during delivery. If
the packaging seal looks suspicious, contact Belkin Technical Support and
do not use the product.
• Inspect product tamper-evident labels to assure that product is properly
sealed. If one or more label is damaged or missing, contact Belkin Tech
Support and do not use that product.
Both Models Are Shown
User's Desktop
Connections
Display Port Video
R/C
Audio
USB Keyboard/Mouse
12V, 1A Power
Mouse
Port 1
Cable
PC 1
F1DN102FLP-DP-3
Belkin Secure Display Port 2-Port Flip KVM Single Output
F1DN102FLP-DP-3: Belkin 2-Port Single Head DP to DP Video Secure FLIP KVM Switch
F1DN202FLP-DP-3: Belkin 2-Port Dual Head DP to DP Video Secure FLIP KVM Switch
User Display
R/C
Audio
Keyboard
Port 2
Cable
PC 2
peripherals to a specific Computer Ports section.
– Make sure that each computer is connected to its own Computer Port
section.
– The LED on the product's top panel indicates which computer has
current access to shared peripherals.
– To switch peripherals between computers, press the push button on
product's top panel or preterably the included romote control.
• Consider the following when deciding where to place the Switch:
– Acess to the top panel buttons or the included remote controller
– The lengths of the cables attached to your keyboard and mouse
– The location of your computers in relation to your console
• Warning: Avoid placing cables near fluorescent lights, air conditioning
equipment, or machines that create electrical noise
(e.g., WiFi transmitters, videos, etc.)
Connections
Display Port Video
R/C
USB Keyboard/Mouse
12V, 1A Power
Mouse
Power
Supply
PC 1
1A / 2A
Belkin Secure Display Port 2-Port Flip Dual Head KVM
NOTE: F1DN202FLP-DP-3 provides audio via the DP connection from the PC
and outputs via DP to a digital (DP) audio capable monitor
User's Desktop
(Dual head unit shown)
User Display
R/C
Keyboard
Port 1 Port 2
1B Cable 2A Cable
1A Cable 2B Cable
PC 2
A B
1B / 2B
F1DN202FLP-DP-3
Power
Supply
8820-02701 Rev.A02