Page 2
Important: smartphone, tablet, or computer. Obstructions such as interior Need more helpful information walls and landscaping can block on your product? Find tips on the signal. installation, controller programming, and more. hunter.direct/wandhelp 1-800-733-2823 hydrawise.com...
Product Installation Step 2: Installing the WAND Module 1. Remove the Wi-Fi cover from the X2 2. Insert the WAND module. controller. When installed, WAND disables the All programming is now managed via controller’s dial and button functions, the Hydrawise cloud-based software from a existing schedule, and settings.
Product Overview Step 3: Navigating WAND with X2 Locate the following: The serial number is used to enable Hydrawise management for the WAND. A. Wi-FI status LED You will be prompted to enter the serial B. Wi-Fi setup button number during the online setup process when adding the controller to your C.
Page 5
“Let's Get Started” button in the email sent to your account. 3. Click the “Let's Get Started” button again on your Hydrawise app or website hunter.direct/HydrawiseiOS screen. 4. Continue following all steps to add your X2 controller to your Hydrawise account and connect to Wi-Fi.
Refer to the online setup wizard for Wi-Fi instructions found in your Hydrawise controller settings account page. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc. and any use of such marks by Hunter Industries is under license. hydrawise.com...