Related Manuals for Hunter A2C-LTE
Summary of Contents for Hunter A2C-LTE
- Page 1 A2C-LTE AND A2C-CELL-E Installation Guide Cellular Communication Modules for Hunter ACC2 Controllers...
- Page 2 Each module includes a pre-registered SIM card in the software application. Visit centralus.hunterindustries.com for use in Hunter controllers only. The card will to set up not work in other devices. a free Hunter account in advance, so your installation can be completed and tested.
-
Page 3: Installation
The module includes a tool for SIM card removal or installation. This tool is normally only used Module Installation when changing from the Hunter-supplied SIM Remove the dust cover, or existing module, to a local SIM. from the bottom rear of the controller facepack. - Page 4 These installations require a Hunter model Mount the bracket as high as possible to the 10010100 wall bracket to complete the wall with mounting hardware appropriate for installation.
- Page 5 Route the antenna cable through the hole in Route the antenna cable through the track on the bracket. Install the antenna on the bracket the back of the door frame to the module in with the nut. Tighten the nut securely. the facepack.
- Page 6 Plastic pedestal: Plastic pedestal mounting requires a Hunter model 10010000 plastic pedestal lid adapter. Route the antenna cable through the hole in the bracket. Secure the antenna to the mounting bracket with the supplied nut. Use the included screws to install the bracket so the antenna protrudes into the recess in the pedestal lid, as shown.
-
Page 7: Configuration And Connection
CONFIGURATION AND CONNECTION The status icon will appear red until the module Press the Main Menu button, and turn the dial is connected to a cellular service. It should to the Settings menu. Push the dial to select. connect automatically within a few minutes, Dial down to the Networking selection and if a qualifying cell tower is within range. - Page 8 Press the Symbols soft key to find periods, slashes, and other punctuation marks as needed. If you plan to use these recommended Hunter data services, you may skip the next section and proceed directly to Software Setup.
-
Page 9: Software Setup
Hunter’s secure, third- Type a name for the controller, and the 10-digit party cellular service provider. You will return to serial number from the A2C-LTE or A2C-CELL-E the setup process when this step is complete. module. -
Page 10: Firmware Verification
FIRMWARE VERIFICATION Follow the on-screen instructions to set up Go to the controller menu for Settings, and billing and payment. When the billing process select Controller Verification. You must select is complete, click to continue with controller the Controller Verification screen before setup. -
Page 11: Compliance And Approvals
COMPLIANCE AND APPROVALS Hunter Industries hereby declares that this product is in If the Verification Code is correct, the controller compliance with the essential requirements and other will be added to the software and the map. relevant provisions of Directive 2014/53/EU (Radio Equipment Directive). - Page 12 © 2020 Hunter Industries Inc. Hunter, the Hunter and the environment. For more information logo, and all other trademarks are property of Hunter on disposal and recycling of this product, Industries, registered in the U.S. and other countries.
Need help?
Do you have a question about the A2C-LTE and is the answer not in the manual?
Questions and answers