Installing Rechargeable Lithium Ion Battery In The Receiver; Power Up Battery Test - 3M Dynatel 2250M-iD Series Operator's Manual

Installing Rechargeable Lithium Ion Battery in the Receiver

Remove the receiver cap.
If the Alkaline adapter is connected then remove and connect the Lithium Ion
battery directly to the connector in the receiver handle.
Slide the battery into the handle with text facing left or right of the receiver
handle. Replace the cap.
Receiver Power Up Battery Test
The receiver batteries are tested for two seconds every time the unit is turned
on.
The bar graph on the display will fill to the relative battery level.
The Battery Icon [8] on the Locating Displays will continuously indicate the
battery level.
8 78-9237-1692-8