Safety Information; Intended Use - 3M Dynatel 2250M-iD Series Operator's Manual

Safety Information

Please read, understand and follow all safety information contained in these
instructions prior to the use of the 3M
Locator. Retain these instructions for future reference.

Intended Use

The 3M Dynatel Cable/Pipe/Fault Advanced M-Series Locator is used to
identify the placement of underground utility lines. The system must be
installed as specified in the 3M Dynatel Cable/Pipe/Marker Locator 2250M-iD
Series Operator Manual. It has not been evaluated for other uses or locations.
If this equipment is used in a manner not specified by 3M, the protections
provided by the equipment may be impaired.
Explanation of Signal Word Consequences
: Indicates hazardous situation which if not avoided,
!
WARNING
could result in death or serious injury.
: Indicates a hazardous situation which, if not avoided,
!
CAUTION
could result in minor or moderate injury and/or property
damage.
NOTICE Indicates a situation which, if not avoided, could result
in property damage.
Explanation of Product Safety Label Symbols
Do not throw away in normal trash.
Do not apply around or remove from UNINSULATED
HAZARDOUS LIVE conductors, which may render
electric shock, electric burn, or arc flash.
! WARNING
This WARNING applies to the following 3M Dyna-Couplers;
• 3" (75 mm) - Part number 3001
• 4.5" (114 mm) - Part number 4001
• 6" (150 mm) - Part number 1196
• All accessory kits containing any of the listed Dyna-Couplers - Part numbers
3019, 4519, 1196/C
A potential for electrical shock exists when using the Dyna-Coupler on cables
energized with electrical power. Use appropriate safety procedures.
DO NOT USE ON CABLES CARRYING IN EXCESS OF 600 VOLTS RMS.
Dynatel Cable/Pipe/Marker M-Series
™ ™
4 78-9237-1692-8