Ford Cargo 2017 Owner's Manual page 144

OPERATION
ECAS (Electronically Controlled Air Suspension)
Front Axle Height Adjustment Mechanism
Front axle lifting system shall be deactivated
when the ignition is switched off and vehicle
shall be lowered to drive level. In this case,
use care for the relationship of the parts of
4
the vehicle approaching the ground with the
surroundings.
Front axle lifting system shall never be sued
when a vehicle speed of 15 km/h is exceeded.
Otherwise there is a risk of damage to
suspension system components.
Operating Instructions for Front Axle
Height Adjustment Mechanism (Only for
Vehicles that the height of the 5th wheel is
lowered)
Ignition switch should be in position 2 to
activate the air control system by the "Lifting
Switch".
When the front axle lifting switch
pressed, front suspension bellows start to
raise the front chassis of the vehicle. While
the system is active, on vehicles with Manual
transmission: An audible warning signal with
a gong sound is heard. On vehicles with an
automatic transmission:
An audible warning signal with a gong sound
is heard and symbol is displayed on
the indicators.
When the rear axle lowered drive level control
button is pressed,
displayed on the indicator. This allows lowering
of 5th wheel level by lowering the rear axle
that is taken to drive level in ECAS manual
control.
is
142
symbol is