Indicators; Meters - Takeuchi TB225 Operator's Manual

CONTROLS
INSTRUMENT CLUSTER

INDICATORS

8. Glow lamp
This lamp goes out when the engine
preheating is completed.
9. Travel speed lamp
This lamp turns on when the travel speed
button is set to the 2nd (high) speed.
10. Deceleration lamp
This lamp turns on when the deceleration
button is pressed. The lamp lights up to
indicate that the engine is in the
deceleration mode at low idling speed.
It flashes When the automatic deceleration
switch is pressed to indicate that the
machine is in the automatic deceleration
mode.
Refer to "Deceleration button" on page
2-39.
Refer to "Automatic deceleration switch"
on page 2-43.

METERS

11. Water temperature gauge
Indicates the temperature of the engine
coolant water.
The LED should be within the green
range during machine operation.
The red range indicates overheating.
12. Fuel gauge
Indicates the amount of fuel in the tank.
Be sure to top off the tank before running
out of fuel.
2-18