Gardena 1242 Series Operating Instructions Manual page 6

Creating watering
programmes :
1.
2.
3.
4.
5.
6.
Watering Programmes ( Level 2)
Prerequisite :
you must have entered the current time and current day.
For reasons of clarity, we recommend that you record the data
for your Irrigation Valves in the watering plan in the appendix of
the Operating Instructions before you begin entering watering data
in the Programming Unit.
Select the watering programme :
You can save up to 6 watering programmes.
1. If you have not reset the time and day and the display shows
the main level, press the Menu key twice.
Programme 1 flashes.
2. Select the programme using the ▲-▼ keys (for example,
programme 1) and then confirm by pressing the Ok key.
START TIME and the hours flash.
Set the Watering Start Time :
3. Set the hours for the watering start time using the ▲-▼ keys
16
(for example hours) and confirm by pressing the Ok key.
START TIME
and the minutes flash.
4. Set the minutes for the watering start time using the ▲-▼ keys
30
(for example minutes) and confirm by pressing the Ok key.
RUN TIME and the hours flash.
Set the Watering Time :
5. Set the hours for the watering time using the ▲-▼ keys
1
(for example hour) and confirm by pressing the Ok key.
RUN TIME and the minutes flash.
6. Set the minutes for the watering time using the ▲-▼ keys
30
(for example minutes) and confirm by pressing the Ok key.
The arrow ê above the watering cycle flashes.
Set the Watering Cycle :
(a) Every 2nd or 3rd day (from the current day)
(b) Select any day (allows daily watering)
17