Related Manuals for Spruce RL Series
Summary of Contents for Spruce RL Series
- Page 1 Inline Fans for a Healthier Environment RL Series Installation Instructions Spruce Environmental Technologies, Inc. 3 Saber Way 3 Saber Way Ward Hill, MA 01835 Ward Hill, MA 01835 www.spruce.com P/N IN022-REV J 10/13...
- Page 2 RL Series Commercial/Residential Ventilation Fan Installation Instructions Please Read And Save These Instructions. DO NOT CONNECT POWER SUPPLY UNTIL FAN IS COMPLETELY INSTALLED. MAKE SURE ELECTRICAL SERVICE TO FAN IS LOCKED IN "ʺOFF"ʺ POSITION. DISCONNECT POWER BEFORE SERVICING FAN. ...
- Page 3 must be performed by a qualified and licensed electrician. All wiring must be in accordance with local and national electrical codes. Safety Instructions for RL Series Commercial/Residential Ventilation Fans For Use in Cooking Areas or as Rangehood or Remote Blowers ...
- Page 4 2.0 Fan Sealing RL Series fans are factory sealed, no additional caulk or other materials are required to inhibit air leakage. 3.0 Ducting Use only metal ducting for fans used in kitchen areas or as range hood or remote blowers. Any type of ducting is acceptable for ...
- Page 5 5.0 Electrical Wiring All wiring must be performed in accordance with the National Fire Protection Association’s (NFPA)”National Electrical Code, Standard #70”-‐‑ c urrent edition for all commercial and industrial work, and state and local building codes. All wiring must be performed by a qualified and licensed electrician.
- Page 6 RL SERIES PRODUCT SPECIFICATIONS The following chart shows fan performance for the RL Series Commercial/Residential Fan: Max Static, Typical CFM vs Static Pressure Model “ WC 0 0.2 0.5 0.75 1 ...
- Page 7 ...
- Page 8 Spruce will replace any Fan which fails due to defects in materials or workmanship. The Fan may be returned (at owner’s cost) to either the point of purchase or the Spruce factory. The point of purchase may require proof of purchase or a bill of sales for replacement.
Need help?
Do you have a question about the RL Series and is the answer not in the manual?
Questions and answers