P4. Automatic Closing - TdA FBD180 Installation And User Manual

FBD120/180/200/220 SECTIONAL GARAGE DOOR OPENER

P4. Automatic Closing

1. Press and hold "SET" button for 4 seconds until 'P1' displayed.
2. Press "UP" button three times until 'P4' is displayed on the LED.
3. Press the "SET" button.
4. Press "UP" or "DOWN" to set auto close time (b0-b9). Press "UP" to increase timer,
press "DOWN" to decrease timer.
Note: Set timer to 'b0' to disable auto close function.
5. Press SET to confirm the setting.
NOTE:
•
When using auto close mode, a photo electric beam must be fitted correctly and tested for
operation at regular intervals. Extreme caution is recommended when using auto close mode.
All safety rules must be followed.
Automatic closing is available only when the door is in fully opened position.
•
Press "SET" button to confirm
Press "SET" button to confirm the
setting
(1~9 minutes adjustable) (Fig.16)
SET
Press and hold "SET" button
for 4 seconds until 'P1' is
displayed
SET
SET
Press "UP" button three times
until 'P4' is displayed on the
LED
Press "UP" or "DOWN" to set auto
close time (b0-b9). Press "UP" to
increase timer, press "DOWN" to
decrease timer.
Note: Set timer to 'b0' to disable
auto close function.
Fig.16
15
SET
SET