Interface; Transmitters - TdA FBD180 Installation And User Manual

FBD120/180/200/220 SECTIONAL GARAGE DOOR OPENER
Manual operation
If the door has to be operated manually due to a power failure, pull the release rope,
open and close the door manually. To reconnect the door, move the door by hand
until it engages into the chain shuttle.

6. Interface

Pushbuttons
"SET" button: initiates programming modes & saves the settings.
"UP" button: opens the door; Increase settings in programming mode.
"DOWN" button: closes the door; decreases settings in programming mode.
"LEARN" button: Transmitter coding and clearing function.
Transmitter
• Button 1, button 2, button 3: The transmitter works in a single channel mode.
With each press of the remote control button which has been programmed, the
gate will open, stop, close or stop cycle.
• Button 4: LOCK /LIGHT button
SET
Fig.10
1
2
3
4
Fig.11
10