Advertisement
Installing the Side Mirror
Kit (for Machines without a
Canopy)
1. Measure 29 mm (1-1/8 inches) out from the edge of
the dash on both the driver's and passenger's side (if
installing a mirror on the passenger's side) and draw a
parallel line to the edge
1
1. 29 mm (1-1/8 inches)
2. Assemble the mirror-mounting bracket to the lower
and upper mirror brackets with 2 bolts (5/16 x 3/4
inch) and flange nuts (5/16 inch) as shown in
1
1. Upper mirror bracket
2. Flange nut (5/16 inch)
3. Lower mirror bracket
3. Position the upper mirror bracket along the parallel
line drawn on the dash
Note: Ensure that the lower mirror-mounting bracket
is contacting the side of the machine.
(Figure
2).
G014829
Figure 2
2
3
4
5
G014830
Figure 3
4. Mirror-mounting bracket
5. Bolt (5/16 x 3/4 inch)
(Figure
4).
1
4. Using the upper mirror bracket as a template, locate,
mark, and drill 2 holes (1/2 inch) in the dash.
5. Install a nut insert into each of the drilled holes
5).
g014829
1. Upper mirror bracket
Figure
3.
2. Screw
6. Secure the upper mirror bracket to the nut inserts with
2 screws (1/4 x 1 inch) as shown in
7. Using the lower mirror bracket as a template, locate,
mark, and drill 2 holes (1/2 inch) in the side of the
machine
g014830
8. Remove the screws securing the upper mirror-mounting
bracket to the dash, and remove the mounts.
Note: Retain the hardware.
2
Figure 4
2
1
3
Figure 5
3. Nut insert
(Figure
6).
Figure 6
G014831
g014831
(Figure
G014832
g014832
Figure
5.
G014833
g014833
Advertisement
