1-4. Screens Displayed while Upgrading the Version
When the
green LED
LED
lights and the
Timer LED
displayed.
Upgrading...
BENVDBPRTV - 12/15/2020 12:22 PM
No image or message may be displayed.
AZ1 VERSIONUP PROCEDURE(EU)
and
amber LED
blink, insert USB into the set, and after about 30 seconds the set is rebooted. Then, the
blinks. After about 3 minutes, the set is rebooted and is turned on. After a while, a completion message is
Upgrade is complete.
If USB is left inserted, a message like above is
displayed. If so, remove USB.
SERVICE BOARD
SERVICE BOARD
Standby
9