How To Change The Pem Settings - Sony KDL-22PX300 Manual

3-4. How to Change the PEM Settings

<To set DATA_TRANS_SET in PEM>
1. Press the "2/5" key on the remote commander to select TCON_CHANGED.
2. Press the "1/4" key on the remote commander to select DATA_TRANS_SET.
3. Press the "3/6" key on the remote commander to select from 0 to 1.
Note: TCON_CHANGED can only be set in the PEM Model.
b
Remote Commander
AZ1 VERSIONUP PROCEDURE(EU)
BENVDBPRTV - 12/15/2020 12:22 PM
Press 2: increment
Press 5: decrement
PEM
a c
004 TCON_CHANGED
000
Press 1: increment
Press 4: decrement
SERVICE
DATA_TRANS_SET
0
PEM Service menu
T - CON BOARD
T - CON BOARD
Press 3: increment
Press 6: decrement
31