READ ME
Notes for Replacing Service Parts for AZ1-H/L Series
BENVDBPRTV - 12/15/2020 12:22 PM
After replacing the
B*HS/BAL
(Upgrade Software even if replacing the Panel only.)
Before upgrading Software,
After upgrading the version, you need to confirm the
GAISO
(For 5-0 Chassis)
!
When upgrading Software,
(If the version of Software already on the repair board is
AZ1 VERSIONUP PROCEDURE(EU)
board, Panel, or
T-con
board, you need to upgrade Software by using the
be sure to disconnect all cables.
Segment ID
and PEM from the Service menu.
be sure to download the most recent version.
and
Model
ID,
and set BTK
(Incorrect settings affect the set's capabilities.)
newer
than the version of Software for upgrade, Software is not upgraded.)
USB memory.
(For 2A-2, 2A-3 Chassis)
3