Basic Screen Layout Of Eit - Elmo CRA-2 User Manual

N o t e
• If the pen is used at an acute angle, the pen position may not be recognized correctly.
Use the pen at a perpendicular angle as much as possible.
• The tablet's operating area corresponds to the entire screen.

Basic screen layout of EIT

This section describes the basic screen layout of EIT.
For details about EIT, refer to the instruction manual of EIT. (⇒P.12)
①
②
■Display screen
① Operation panel
Drawing area
②
（Entire screen）
③ Menu area
④ Sub menu area
The following operations can be performed from the operation
panel:
- To select the type of pen
- To configure the settings such as "Delete All"
- To switch to the document camera image
- To switch to the drawing screen
This area is for displaying the document camera image and
drawing. The entire screen will be the drawing area.
These buttons are for configuration or operation of the document
camera.
These buttons are for advanced operations.
The buttons to be displayed varies depending on the mode.
14
③
④