Installing The Touchscreen Electronic Blackboard Software "Elmo Interactive Toolbox (Eit) - Elmo CRA-2 User Manual

Installing the touchscreen electronic blackboard software "ELMO
Interactive Toolbox (EIT)"
The touchscreen electronic blackboard software "ELMO Interactive Toolbox (EIT)" will be
used to perform various operations such as annotation.
※Annotation can be performed by using the Microsoft Paint when the tablet is connected to a
computer with the USB cable.
Before using the tablet, EIT needs to be installed in your computer.
※You can use the tablet as a mouse without installing EIT.
Install EIT according to the following instructions:
The installation of EIT needs to be done once when the tablet is used with a computer for the
first time. (The installation of EIT is not required each time the tablet is used with a computer.)
・When using Windows:
① Download "EITSetup_○.○.○.zip" from the following ELMO official websites.
https://www.elmousa.com/
https://www.elmoeurope.com
② Un zip the downloaded zip file and the msi file will be created.
Start the msi file and follow the instructions to install.
③ When the software is successfully installed, the "ELMO Interactive
Toolbox" shortcut icon will appear on the desktop.
・When using Mac:
① Download "ELMO Interactive Toolbox _○.○.○.pkg"from the following ELMO official
websites.
https://www.elmousa.com/
https://www.elmoeurope.com
② Start the downloaded pkg file and follow the instructions to install.
Depending on your computer, you may be asked to restart the computer. In that
case, press "YES" to restart the computer.
Caution
12