Related Manuals for Elmo CRA-2
Summary of Contents for Elmo CRA-2
- Page 1 User's Guide ELMO Wireless Pen Tablet (CRA-2) Read this User's Guide carefully before using the CRA-2. Store this User's Guide in a safe place in case you need it again.
- Page 2 IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. plugs, convenience receptacles, and the 2) Keep these instructions. point where they exit from the apparatus. 3) Heed all warnings. 11) Only use attachments/accessories 4) Follow all instructions. specified by the manufacturer. 5) Do not use this apparatus near water. 12) Use only with the cart, stand, tripod, 6) Clean only with dry cloth.
- Page 3 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
- Page 4 Usage Precautions ■ ■ ■ ■ About electric waves used by the tablet This product uses electric waves in the 2.4 GHz band. When using the product, a radio station license is not necessary. However, please note the following precautions. Do not use the product near the followings: ・Microwave ovens/industrial, scientific or medical equipment, such as pacemakers ・In-factory radio stations for mobile unit identification systems (radio stations that...
- Page 5 ■ ■ ■ ■ Cleaning When cleaning the product, remove the connected USB cable and perform in a location that is not subject to humidity or moisture. ・Remove any dirt from the product with a soft, dry cloth. ・To remove stubborn dirt, dilute some detergent in water, dip a soft cloth in the water, and then wring it out before using it to wipe away the dirt.
-
Page 6: Table Of Contents
Part names ........................10 Preparations ........................11 Charging ..........................11 ....12 Installing the touchscreen electronic blackboard software “ELMO Interactive Toolbox (EIT)” Basic tablet operations ....................13 Basic pen operations ......................13 Basic screen layout of EIT ....................14 How to Use ........................15 1. -
Page 7: Before Use
Before Use Thank you very much for purchasing CRA-2. Please read this manual carefully to make suitable use of the product. Also, please be sure to refer to any supplemental information included with this product. ・ The screen images and drawings in this manual may be different from actual ones. -
Page 8: Main Functions
■ Use with document camera and IWB By connecting to the separately sold Elmo document camera (L-12iD / TT-12iD / L-12F / TT-12F / L-12W / TT-12W / MA-1 / MO-2 ), you can use the tablet without a computer. -
Page 9: Supplied Items
Supplied items The following items are supplied with the product. Contact your dealer if any of the following items are not included in the package you purchased. Tablet Extra core ×8 Pen holder Wireless dongle （※Stored inside the pen holder） Quick Start Guide &... -
Page 10: Part Names
Part names Tablet: Front view Shortcut keys To select the tablet operations. 〈Selecting the mode (⇒P.18)〉 Operating area Status LED To indicate the operational status and battery level.〈About the Status LED (⇒P.20)〉 Rear view Pen storage To store the pen. Wireless dongle storage To store the wireless dongle. -
Page 11: Preparations
Preparations Charging Before use, check whether the tablet is charged. ➊ Connect a computer and the tablet with the USB cable. When charging starts, the "Status LED" on the center left of the tablet turns red. When charging is complete, the "Status LED"... -
Page 12: Installing The Touchscreen Electronic Blackboard Software "Elmo Interactive Toolbox (Eit)
Installing the touchscreen electronic blackboard software “ELMO Interactive Toolbox (EIT)” The touchscreen electronic blackboard software “ELMO Interactive Toolbox (EIT)” will be used to perform various operations such as annotation. ※Annotation can be performed by using the Microsoft Paint when the tablet is connected to a computer with the USB cable. -
Page 13: Basic Tablet Operations
Basic tablet operations This section describes the basic tablet operations, and the operation names. Basic pen operations 1. Draw 2. Move the cursor 3. Select a menu button 10mm Move while holding Touch a menu button. Move while touching the slightly away from tablet. -
Page 14: Basic Screen Layout Of Eit
N o t e • If the pen is used at an acute angle, the pen position may not be recognized correctly. Use the pen at a perpendicular angle as much as possible. • The tablet's operating area corresponds to the entire screen. Basic screen layout of EIT This section describes the basic screen layout of EIT. -
Page 15: How To Use
You can use the tablet as a mouse to control a computer. You can also perform various operations such as control of the tablet and annotation by using the touchscreen electronic blackboard software “ELMO Interactive Toolbox (EIT)”. (EIT needs to be installed in your computer beforehand.) Connect the wireless dongle to the USB port of your computer and turn on the computer. -
Page 16: Turning On The Tablet
■ ■ ■ ■ Connecting with the USB cable Using with the document camera Connect the tablet and the document camera with the supplied USB cable. You can draw on the document camera image. Using with a computer Connect the tablet and your computer with the supplied USB cable. You can draw on the computer screen. -
Page 17: Operating The Tablet
3. Operating the tablet Pen recognition of the tablet is started when the operating area is touched by the pen tip. ※Only when using wireless connection, if there is no operation for a certain period of time (about 45minutes), the tablet will automatically switch to standby mode. Using with the document camera You can operated the icon or draw on the document camera image. - Page 18 Selecting the mode By touching the shortcut keys on the left side of the tablet, you can select the mode that you want to use. Details of the modes are described in the table below. ※Available functions may differ depending on the document camera used. Shortcut keys Mode Shortcut key...
-
Page 19: Other Functions
Other Functions This section describes various functions related to the tablet. Replacing the pen tip When the pen tip becomes round, replace it with the supplied extra core. Use the supplied pen holder when replacing the pen tip. - When replacing the pen tip, be sure to replace it with the supplied "extra core". Caution - Make sure that children do not put small parts into their mouths. -
Page 20: About The Status Led
About the Status LED The Status LED on the tablet indicates the status of the device. ■ ■ ■ ■ Status LED LED status Operation When the wireless switch is ON, communication with the wireless dongle is being performed correctly. Charging. -
Page 21: Troubleshooting
Troubleshooting If trouble occurs or you have any queries, first check this section. If the problem persists, check your warranty and contact the dealer where you purchased the product. Cannot turn on the tablet. Is the tablet fully charged? Refer to "Charging" and then charge the tablet. (⇒P.11) Cannot use the tablet. - Page 22 Communication between the tablet and wireless dongle is unstable If third-party tablet software is running, it may conflict Third-party tablet software is with the operations of this tablet. installed. Do not operate third-party tablet software while using this tablet. If there is an obstruction between the tablet and the wireless dongle, the communication may be unstable.
-
Page 23: Product Specifications
Product Specifications Product specifications Model Name CRA-2 Model Name 0℃～40℃ Operating Temperature 8.0 × 5.0 inches （203.2mm×127.0mm） 0.005mm Reading Range Reading Resolution 0.3mm Reading Accuracy When wired：266PPS When wireless：233PPS Reading Speed 10mm 8192 level Pen Pressure Level 2.4GHz Wireless Band Used Communication Range Approx. -
Page 24: Disclaimer
The software installed on your computer or your peripheral devices may inhibit the operation of ELMO software. ELMO accepts no responsibility whatsoever for any losses, direct or indirect, that result from the use of ELMO software. About trademarks The following trademarks and registered trademarks are used in this manual. - Page 25 株式会社エルモ社 OVERSEAS SUBSIDIARY COMPANIES 〒457-0078 ELMO USA CORP. 名古屋市南区塩屋町一丁目３番地４ □Headquarters Web：https://www.elmo.co.jp 6851 Jericho Turnpike Suite 145 製品のお問い合わせは、下記営業所へ Syosset, NY 11791 □ 東日本営業所 Tel. (516) 501-1400 Fax.(516) 501-0429 □札幌オフィス E-mail： elmo@elmousa.com 〒001-0021 札幌市北区北 21 条⻄ 8 丁目 3 番 8 号...