Advertisement
Step 4
Seal the slit of the cable cap for the prevention of water
leakage.
Outside
Cable
Inside
Step 5
Mount another cable cap (accessory) on the rear plate.
Step 6
After waterproofing the hole for fixing mount bracket, and
the cap part on rear surface of mount bracket, fix the mount
bracket on the installation surface.
Mount the wall mount bracket on the wall with 4 screws
(M10: locally procured).
Minimum pull-out strength: 823 N {185 lbf}/per 1 pc.
Sealant (locally procured)
Cable cap (with a slit)
Cable
access
hole (rear)
Cable cap
Step 7
For the installation method of WV-Q186 or WV-Q187 as well
as the connection and storage of the cables, please refer to
the operating instruction of WV-Q186 or WV-Q187.
7
Advertisement
