General information
2
General information
The appliance provides domestic hot water and central heating
to properties that are serviced from district heating or central
boiler plants. The appliance consists of two heat exchangers,
one for the domestic hot water providing instant hot water at a
safe regulated temperature and the second for central heating.
The appliance is indirect so the primary heating circuit is
hydraulically separated from the property central heating by
the second plate heat exchanger. Domestic hot water takes
priority over the central heating demand.
This appliance must only be used as a source of heating and hot
water in a sealed system.
2.1
Appliance identification and serial number
The data label [1] contains information of the appliance model
and serial number. this is located on the bottom centre of the
cover panel.
Fig. 1
Data label location
4
For your own records
Please ensure that the Commissioning Checklist has been
completed by your installer or service engineer.
Model:
Serial number
Date of installation:
Table 2
1) See appliance identification label on appliance casing
(shown in figure 1) or Commissioning Checklist at the end
of the commissioning section in the Installation,
Commissioning & Servicing Instructions.
2.2
Maintaining your appliance
Your new appliance represents a long term investment in a
reliable, high quality product.
Wipe the appliance casing with a soft clean cloth. Please do not
use chemical cleaning products which may damage the paint
finish.
In order to realise its maximum working life, and to ensure it
continues to operate at peak efficiency and performance, it is
essential that when your appliance requires maintenance that
it is carried out by a competent person.
1
1)
:
Appliance details
Greenstar HIU – 6 720 810 422 (2015/05)