Table of Contents
Advertisement
Installation Manual
2 General
These coils are approved for upfl ow or downfl ow, vertical and horizontal installation.
For furnace applications, the coil must be installed downstream (in the air outlet) of
the furnace.
2.1 Codes & regulations
This product is designed and manufactured to comply with national codes.
Installation in accordance with such codes and/or prevailing local codes/regulations
is the responsibility of the installer . The manufacturer assumes no responsibility for
equipment installed in violation of any codes or regulations.
The United States Environmental Protection Agency (EPA) has issued various
regulations regarding the introduction and disposal of refrigerants. Failure to follow
these regulations may harm the environment and can lead to the imposition of
substantial fi nes. Should you have any questions please contact the local offi ce of
the EPA.
2.2 Inspection upon unit arrival
As soon as unit is received, it should be inspected and noted for possible shipping
damage during transportation. It is carrier 's responsibility to cover the cost
of shipping damage. Manufacturer or distributor will not accept a claim from
contractors for any transportation damage.
2.3 Clearances
Following clearances should be provided during installation:
1.
Maintenance and service access, including coil cleaning and coil assembly
removal
2.
Refrigerant piping and connections
3.
Condensate drain line
For ensure the proper installation, Select a solid and level site. Ensure enough space
required for installation and maintenance.
AIRFLOW
Figure 1
Clearance -front view (including air duct)
Bosch Thermotechnology Corp. | 03.2017
Front of unit
Figure 2
Clearance - top view (including air duct)
Bosch Multi-Position Cased Coils | 5
Data subject to change
Hide quick links:
Advertisement
Table of Contents
