Advertisement
Keysight N9038A MXE EMI Receiver
Option ESC
External Source Control
Notice: This document contains references to Agilent.
Please note that Agilent's Test and Measurement busi-
ness has become Keysight Technologies. For more in-
formation, go to www.keysight.com.
Installation Note
Part Number N9038-90016
Printed in USA August 2014
Advertisement
Table of Contents
Related Manuals for Keysight Technologies N9038A MXE
Summary of Contents for Keysight Technologies N9038A MXE
- Page 1 Option ESC External Source Control Notice: This document contains references to Agilent. Please note that Agilent’s Test and Measurement busi- ness has become Keysight Technologies. For more in- formation, go to www.keysight.com. Installation Note Part Number N9038-90016 Printed in USA August 2014...
- Page 2 The information contained in this document is subject to change without notice. Keysight Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Keysight Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 Option ESC - External Source Control Installation Kit Option ESC - External Source Control Installation Kit Products Affected: MXE N9038A Serial Numbers: To Be Performed By: (X) Agilent Service Center (X) Personnel Qualified by Agilent (X) Customer Estimated Installation Time: 0.5 Hours Introduction This kit contains all of the instructions required to install Option ESC on an Agilent MXE EMI...
- Page 4 Option ESC - External Source Control Installation Kit Installation Procedure over USB 1. Locate the Option Upgrade Entitlement Certificate from the kit. 2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the Certificate. 3. After redeeming your Option Upgrade Entitlement Certificate you will receive an email with an attached License File.
- Page 5 Option ESC - External Source Control Installation Kit Alternate Installation Procedure The License File can be manually installed over USB or LAN by placing the license file in the following folder on the signal analyzer C:\Program Files\Agilent\licensing Verify the Installation 1.
- Page 6 Option ESC - External Source Control Installation Kit Installation Note N9038-90016...
Need help?
Do you have a question about the N9038A MXE and is the answer not in the manual?
Questions and answers