White Rodgers 1F97-51 Operation Manual page 27

Program Cooling Temperatures
CAUTION
!
If outside temperature is below 50 F, we
recommend that you remove the ther-
mostat from the wall before proceeding
with the following steps to program cool-
ing temperatures. Personal injury and/or
property damage could result from air
conditioner compressor slugging. Fresh
"AA" alkaline batteries (such as Ener-
®
gizer brand) must be installed to per-
form off-wall programming. Program-
ming away from the wall should prevent
accidental compressor operation. BE
SURE TO PRESS
DISPLAYED BEFORE REATTACHING
THE THERMOSTAT TO THE SUBBASE!
SYSTEM
UNTIL OFF IS
SWITCH
1. To program cooling temperatures for the
heating/cooling periods you have already
SYSTEM
set, press
SWITCH
2. Press VIEW once. The Monday heating/cool-
PRGM
ing period 1 start time you programmed
earlier will be displayed, along with the
currently programmed COOL A, B, C, or D
temperature.
3. Press or
B, C, or D temperature you want for Monday's
heating/cooling period 1. If you want the fan
to run continuously during this period, press
FAN
until PRG FAN is displayed.
SWITCH
VIEW
4. Press , then press
PRGM
select Monday's COOL A, B, C, or D tem-
until COOL is displayed.
to display the COOL A,
or to
27