Entering Your Program - White Rodgers 1F97-51 Operation Manual

ENTERING YOUR PROGRAM

Follow these steps to enter the heating/cooling
program you have selected.
We recommend that you remove the thermostat
from the wall for programming (especially for
entering cooling programming). Fresh "AA" Ener-
®
gizer alkaline batteries must be installed to per-
form off-wall programming. BE SURE SYSTEM
SWITCH IS SET TO OFF POSITION BEFORE
REATTACHING THERMOSTAT TO SUBBASE!
Set Current Time and Day
SET
1. Press once. The display will show min-
CLOCK
utes only.
EXAMPLE:
2. Press and hold either
22
TIME or TIME until you
FWD BACK
reach the correct minutes.
3. Press SET once. The display window will
CLOCK
show the hour only.
EXAMPLE:
4. Press and hold either
reach the correct hour and AM/PM designa-
tion (AM begins at midnight; PM begins at
noon).
SET
5. Press once. The display will show the
CLOCK
day of the week as an abbreviation (MON
for Monday, TUE for Tuesday, etc.).
6. Press and hold either
reach the current day of the week.
TIME or TIME until you
FWD BACK
TIME or TIME until you
FWD BACK