White Rodgers 1F97-1277 Installation And Operating Instructions Manual page 7

INSTALLER/CONFIGURATION MENU INSTALLER/CONFIGURATION MENU
INSTALLER/CONFIGURATION MENU INSTALLER/CONFIGURATION MENU INSTALLER/CONFIGURATION MENU
18) Hea Hea Heat t t t t T T T T T emper Hea Hea emper empera a a a a tur emper emper tur tur tur ture Limit R e Limit Rang e Limit R e Limit R e Limit R
the highest setpoint temperature for heat. The default
setting is 99°F . It can be changed between 62°F and
98°F by pressing the
limit limit limit" icon will be displayed to the left of your setpoint limit limit
temperature when using this feature. The "temper
limit limit limit" icon will flash if an attempt is made to adjust the limit limit
temperature beyond the range selected.
19) Cool Cool Cool T T T T T emper Cool emper empera a a a a tur emper ture Limit R tur tur e Limit R e Limit Rang e Limit R
Cool emper tur e Limit R
the lowest setpoint temperature for cool. The default
setting is 45°F . It can be changed between 46°F and
82°F by pressing the
limit limit
limit" icon will be displayed to the left of your setpoint limit limit
temperature when using this feature. The "temper
limit" icon will flash if an attempt is made to adjust the limit limit limit limit
temperature beyond the range selected.
20) K K K K K e e e e e ypad Loc ypad Loc ypad Loc ypad Lock k k k k out out out
ypad Loc out out – This step allows you to select the
type of lockout or limited range security required. If no
lockout or limited range security is required, press
advance the menu.
Three security settings are available in this menu item.
Use the or keys to select the lockout desired.
Lockout selections are:
"K K K K K e e e e e ypad Loc ypad Loc ypad Loc ypad Lock k k k k out out out and L L L L L " = Total Lockout. Total Lockout out
ypad Loc out
locks all keys.
"K K K K K e e e e e ypad Loc ypad Loc ypad Loc ypad Lock k k k k out ypad Loc out out out out and P P P P P " = Partial Lockout. Partial Lock-
out allows only the
set temperature limits.
"T T T T T emper emper emper empera a a a a tur ture Limit tur tur e Limit/K K K K K e e e e e ypad Loc e Limit e Limit
emper tur e Limit
changing the temperature limits in the Configuration
Menu.
Keypad Lockout Combination Number Selection Keypad Lockout Combination Number Selection Keypad Lockout Combination Number Selection Keypad Lockout Combination Number Selection Keypad Lockout Combination Number Selection
Display will read "OFF OFF" "K K K K K e e e e e ypad Loc OFF OFF OFF
Skip this step and continue through the configuration
menu items 19 thru 22 if you require an Air Filter Change
out indicator or Humidifier Pad Change out indicator by
pressing the button to advance.
Return to this point when you are ready to start your
selected lock-out and continue by:
Pressing or keys to select ON.
Press . Display will read "000
Pressing or keys to select your keypad lockout
combination number. Note: "000
combination choice.
Record the number you select for future use. Record the number you select for future use.
Record the number you select for future use. Record the number you select for future use. Record the number you select for future use.
Press to exit the menu. The security feature you
select will start in 10 seconds. The system button will
remain active for 10 seconds to allow setting Heat, Off,
Cool or Auto.
ange e e e e – This feature adjusts ang ang ang
tempera a a a a tur temper temper
or key. The "temper temper
temper tempera a a a a tur temper
temper
ang ange e e e e – This feature adjusts ang
ang
or key. The "temper tempera a a a a tur temper temper temper
tempera a a a a tur temper temper temper
or keys to operate within your
ypad Loc ypad Lock k k k k out ypad Loc out out" prevents out
ypad Loc out
ypad Loc ypad Loc ypad Lock k k k k out ypad Loc out out out out".
000 000 000 000".
000 000 000" is not a valid
000
21) Select Remote Temperature Sensor Select Remote Temperature Sensor Select Remote Temperature Sensor Select Remote Temperature Sensor Select Remote Temperature Sensor – This control
allows one wired remote temperature sensor (indoor or
outdoor) be connected to it and indicates the measured
temperature in clock digits. This menu enables you to
tur ture e e e e tur
tur
select the remote sensor and also configure it as indoor
tur ture e e e e tur or outdoor temperature sensor. Factory default is off.
tur
Select R R R R R emote On emote On emote On emote On and R R R R R emote in
emote On
Outdoor R Outdoor R Outdoor R Outdoor R Outdoor Remote emote emote emote emote.
Local Local T T T T T emper Local emper empera a a a a tur emper
Local Local emper
only when indoor remote temperature sensor is enabled.
Factory default is On LS
desire by using
tur tur tur ture e e e e
indoor remote temperature reading will be used for
control.
tur tur tur ture e e e e
22) Select Chang Select Chang Select Chang Select Chang Select Change Filter R
will display "Chang
operation. This is a reminder to change or clean your air
filter. This time can be set from 25 to 1975 hours in 25
hour increments. A selection of OFF will cancel this
to
feature. When "Chang
clear it by pressing Clean Display. In a typical application,
200 hours of run time is approximately 30 days.
emote in emote in (for indoor) or emote in
emote in
tur tur e Sensor disa e Sensor disab b b b b le le le le le – This is applicable e Sensor disa
ture Sensor disa tur e Sensor disa
On LS On LS. You can make it Of On LS
On LS
or touch keys.Then, only the
e Filter R e Filter R e Filter R e Filter Run un un un un Time Time – The thermostat Time Time Time
Chang Chang Change Filter Chang e Filter" after a set time of blower e Filter e Filter e Filter
Change Filter Chang Chang Chang e Filter e Filter e Filter e Filter" is displayed, you can
Of Off f f f f LS Of LS if you LS LS
Of LS
7