White Rodgers 1F97-1277 Installation And Operating Instructions Manual page 6

INSTALLER/CONFIGURATION MENU INSTALLER/CONFIGURATION MENU
INSTALLER/CONFIGURATION MENU INSTALLER/CONFIGURATION MENU INSTALLER/CONFIGURATION MENU
1) GAS or Electric (ELE) fan operation. If the heating
system requires the thermostat to energize the fan,
select ELE. Select GAS if the heating system energizes
the fan on a call for heat. Note:
stat switches the option to ELE. stat switches the option to ELE. stat switches the option to ELE. stat switches the option to ELE. stat switches the option to ELE.
2) Pr Pr Pro o o o o g g g g g r r r r r ams per w Pr Pr ams per w ams per week ams per w ams per w eek eek eek eek – This control can be configured for
7 independent day or 5/1/1 day programming or non-
programmable modes. Default is 7-day mode. The
display indicates "7 Da 7 Da 7 Da 7 Da 7 Days ys ys ys ys" as default. Other options "5 5 5 5 5
Da Da Days Da Da ys" or "0 Da ys ys ys 0 Da 0 Da 0 Days 0 Da ys ys ys ys" can be selected by pressing touch
keys, or . If "0 Da 0 Days 0 Da 0 Da 0 Da
mable mode, the step for EMR will be skipped, as this
feature will not be available in this mode.
3) Program Steps per day Program Steps per day – This control can be config- Program Steps per day Program Steps per day
Program Steps per day
ured for 4 or 2 program steps per day. Default is "4 PS
and can be toggled between 4 PS and 2 PS by pressing
the or touch keys.
4) System Switc System Switch Configur System Switc System Switc System Switc h Configur h Configur h Configura a a a a tion h Configur
configured for Heat and Cool with Auto changeover
default (Cool-Off-Heat-Auto). Can be configured as Heat
& Cool (Cool-Off-Heat), or Heat Only (Off-Heat), or Cool
Only (Cool-Off).
5) Energy Management Recovery (EMR) Energy Management Recovery (EMR) Energy Management Recovery (EMR) – (this step is Energy Management Recovery (EMR) Energy Management Recovery (EMR)
skipped if configured as non-programmable).
When set to "On" causes the thermostat to start heating
or cooling early to make the building temperature reach
the program setpoint at the time you specify.
Example Example Example: Let us say, the heating program is 65°F at Example Example
night and 70° at 7 AM. If the building temperature is 65°F,
the difference is 5°F . Allowing 5 minutes per °F rise, the
thermostat setpoint will change to 70° at 6:35 AM.
Cooling allows more time per °F , because it takes
longer to reach temperature.
6 & 7) Cy Cy Cy Cy Cyc c c c c le R le R le R le Ra a a a a te Selection le R te Selection – The factory default setting te Selection te Selection te Selection
is fast cycle (FA Cr) in all modes (Heat, Cool). To
slow cycling (SL, Cr), press touch keys
between FA & SL. The cycle rates are as below different
selections:
Mode Mode Fast rate Fast rate
Mode Mode Mode Fast rate Fast rate Fast rate
Heat 0.6°F
Cool 1.2°F
8) Select Compressor Lockout (CL) Select Compressor Lockout (CL) Select Compressor Lockout (CL) Select Compressor Lockout (CL) – Selecting CL On Select Compressor Lockout (CL)
will cause the thermostat to wait 5 minutes between
cooling cycles. This is intended to help protect the
compressor from short cycling. Some of the newer
compressors have already got a time delay built in and
do not require this feature to be activated in the thermo-
stat. Your compressor manufacturer can tell you if
this lockout feature is already present in their system.
When the thermostat compressor time delay is activated,
it will flash the setpoint for up to five minutes.
9) Select Continuous Backlight Select Continuous Backlight Select Continuous Backlight Select Continuous Backlight Select Continuous Backlight – In low lighting condi-
tions, display backlight improves the display contrast.
When C C C C C terminal is connected, selecting dL On will turn
the backlight on continuously. Selecting dL Off will turn
the backlight on momentarily after any key is pressed.
When C C C C C terminal is not powered (battery only), dL On
enables the momentary backlight whenever a key is
pressed.
6
Note: Note: R R R R Resetting the ther Note: Note: esetting the ther esetting the ther esetting the thermo- esetting the ther
ys" is selected for non-program- ys ys ys
4 PS 4 PS
4 PS 4 PS"
tion tion tion tion – This thermostat is
or toggle
Slow rate Slow rate
Slow rate Slow rate Slow rate
1.2°F
1.7°F
Select Bac Select Bac klight Intensity klight Intensity
10) Select Bac Select Bac Select Backlight Intensity klight Intensity klight Intensity – This thermostat has the
ability to provide two selectable intensities of the back-
light: HI and LO. Using
mo- mo- mo- mo- toggle the selection between HI and LO.
Select Temperature Display Adjustment 4 LO to 4 HI Select Temperature Display Adjustment 4 LO to 4 HI
11) Select Temperature Display Adjustment 4 LO to 4 HI Select Temperature Display Adjustment 4 LO to 4 HI Select Temperature Display Adjustment 4 LO to 4 HI
This allows you to adjust the room temperature display
by an amount in the range of -4°F to +4°F in 1° steps by
using the or
accurately calibrated at the factory, however you have the
option to change the display temperature value to match
your previous thermostat, if you so prefer.
12) Select °F or °C R Select °F or °C Readout Select °F or °C R Select °F or °C R
Select °F or °C R
ature unit by pressing
13) Select Select A A A A A udio Pr Select Select Select udio Prompting (Bee udio Pr udio Pr udio Pr
default setting is on (b b b b b , , , , , On
beeper select OFF .
Select Da Select Da ylight Sa ylight Sa
14) Select Da Select Daylight Sa Select Da ylight Saving ylight Sa
will allow the thermostat to calculate the DST automati-
cally and apply it to the Real Time Clock display. Default
On. Use or
15 & 16) Select Select A A A A A utoma Select Select Select
of the A A A A A uto Sc uto Schedule uto Sc uto Sc
uto Sc
program a desired comfort temperature into all the
program periods along with a 6° set back for night
periods of both Heat and Cool programs. Factory default
is "On" for both. When Hea
activated while in Heat or Cool mode, select desired
setpoint temperature and press A A A A A uto Sc
Sc Sc hedule hedule
Sc Sc Schedule hedule will flash, press it again to copy. This value will hedule
be copied into all the morning, day and evening program
periods. The night program periods will be with a 6°F set
back.
17) Select Cool Sa Select Cool Sa Select Cool Sa Select Cool Sa Select Cool Savings™
the thermostat will make small adjustments to the sensed
temperature during periods of high demand to reduce AC
system running time and save energy. When the cooling
system has been running for more than 20 minutes,
humidity in the home will be lower and a higher
temperature will feel comfortable. After 20 minutes of run
time, the thermostat will start decreasing the sensed
temperature in steps of less than one degree as the
system continues to run. These adjustments will eventu-
ally cause the system to satisfy the thermostat to turn the
system off and reduce the energy consumption. When
the Cool Savings™ feature is active and making adjust-
ments, the display will flash "CoolSa
of the adjustments to the sensed temperature is depen-
dent on the Cool Savings™ value that is set, 1 being the
least adjustment and 6 being the most adjustment. With
this feature set to OFF , no change will occur when the AC
system is continuously running during the periods of high
demand. Periods of high demand will normally occur
during the late afternoon and early evening on the hottest
days of the summer. As demand lessens the adjustments
to sensed temperature are reversed until sensed
temperature returns to normal and "CoolSa
longer flashes.
or touch keys you can
touch keys. Your thermostat was
eadout – Select the desired temper- eadout eadout
eadout
or . Factory default is °F .
ompting (Beeper) On or Of ompting (Bee ompting (Bee ompting (Bee per) On or Of per) On or Of per) On or Of per) On or Off f f f f – Factory
On On). If you wish to turn off the On On
ving ving Time Calcula Time Calcula tion tion
ving ving Time Calcula Time Calcula Time Calculation tion tion – This feature
touch keys to select the feature, OFF .
utomatic Sc utoma utoma utoma tic Sc tic Sc tic Schedule tic Sc hedule – With just one touch hedule hedule hedule
hedule hedule hedule key this feature allows you to
hedule
Heat t t t t AS On Hea Hea Hea AS On and Cool AS On AS On AS On Cool Cool Cool AS On Cool
uto Schedule uto Sc uto Sc hedule hedule. A A A A A uto hedule
uto Sc hedule
vings™ vings™ vings™ vings™: With Cool Savings™ enabled,
CoolSa CoolSa CoolSavings" vings" vings" vings". The amount
CoolSa vings"
"CoolSa "CoolSavings" "CoolSa "CoolSa
AS On AS On are AS On AS On
uto uto uto
uto
vings" vings" vings" no vings"