Table of Contents
Advertisement
Control Panel Functions
Control
100
100
AUTO IN PROGRESS
INPUT SELECT
DVI DIGITAL
DSUB ANALOG
TV
V1 (AV)
V2 (S)
HDTV
* When the TV source is available.
PIP
INPUT
MENU
AUTO/SELECT
CONTROLS LOCKED
CONTROLS UNLOCKED
Direct Access Function
• Bring up Contrast and Brightness adjustment.
• Use these buttons to go up and down the channel
when the TV source is available.
VOLUME:
37
Use these buttons to decrease or increase the volume level.
AUTO adjustment function
When adjusting your display settings, always press the
AUTO/SELECT button before entering the On Screen
Display(OSD). This will automatically adjust your display
image to the ideal settings for the current screen
resolution size (display mode).
The best display mode is 1280x1024.
Source Selection:
SOURCE
Use this button to select an input signal.
• DVI DIGITAL: DVI digital signal
• DSUB ANALOG: 15-pin D-sub analog signal
• TV: TV
• V1 (AV): Composite video
• V2 (S): S video
• HDTV: HDTV
PIP (Picture in Picture) function
This PIP (Picture-in-Picture) function allows the image
from the TV (HDTV), VCR or DVD to be displayed on a
sub-screen while you are using a computer.
The sub-screen is changed in the order shown below.
: SMALL -> LARGE -> OFF
CONTROLS LOCKED/UNLOCKED :
MENU and
This function allows you to secure the current control settings,
so that they cannot be inadvertently changed. Press and hold
the MENU button and
"CONTROLS LOCKED" appears.
You can unlock the OSD controls at any time by pushing the
MENU button and
the message "CONTROLS UNLOCKED" will appear.
A6
AUTO/SELECT
button for 3 seconds: the message
button for 3 seconds:
Advertisement
Table of Contents
