Table of Contents
Advertisement
Troubleshooting
"IMAGE SIZE" function on OSD menu does not work.
"IMAGE SIZE" function
on OSD menu does not
work?
Have you installed the display driver?
Have you installed the
display driver?
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
USB function
USB function cannot be
setup.
Check if the resolution is set as 1280x1024 or less
than 512x360.
The optimal resolution is 1280x1024 and the
image is fully displayed on the monitor and is not
converted as 1:1 image size. If the resolution is
less than 512x360, the image size is smaller than
that of the OSD's and is also not converted as 1:1
image size.
Be sure to install the display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Make sure to check if the video card supports
Plug&Play function.
Check if the USB cable is correctly connected.
Check if the PC and OS are USB compliant.
For verification of USB support, consult the
manufacturer of each system.
A18
Advertisement
Table of Contents
