Table of Contents
Advertisement
Heating Program for ALL days of the Week:
If you want to change the preprogrammed times
and temperatures, follow these steps.
1. Determine the heating and cooling tem-
peratures you want to use. You may select
up to two heating temperatures (HEAT A
and HEAT B), and up to two cooling tem-
peratures (COOL A and COOL B). Use the
table on the next page to write down the
temperatures you have selected. Keep in
mind that you can program up to 4 tempera-
tures (2 heating, 2 cooling) at a time.
20
FACTORY PREPROGRAMMING
PERIOD
TIME
TEMP
64
1
5:00 AM
70
2
8:00 AM
64
3
5:00 PM
64
4
10:00 PM
Cooling Program for ALL Days of the Week:
PERIOD
TIME
1
5:00 AM
2
8:00 AM
3
5:00 PM
4
10:00 PM
NOTE
To operate properly in the AUTO mode, there
must be a minimum 1 F separation between
the highest heat temperature and the lowest
cool temperature (see diagram below).
79
COOLING TEMPERATURES
78
77
76
75
HEATING TEMPERATURES
74
73
TEMP
82
78
82
82
DEAD BAND 1 F
Advertisement
Table of Contents
