White Rodgers 1F92W-71 Operation Manual page 33

CAUTION
!
If the outside temperature is below 50 F,
DO NOT use
ture below the setpoint temperature.
Property damage may result due to
compressor operation in cold weather.
12. Why doesn't the temperature change at
the time I programmed?
There may be a number of causes for this
situation. The following are primary rea-
sons.
• The EMR function is operating. The
EMR function will bring the system on
automatically to bring the temperature
to the selected level by the beginning of
the next program period. See OPER-
ATING YOUR THERMOSTAT.
to move the tempera-
• You have programmed the incorrect
day or time. Check your programming
(be sure that the times you programmed
are correct AM or PM times). See PRO-
GRAMMING YOUR THERMOSTAT.
• The thermostat is in the HOLD mode.
Press RUN to start program operation.
PRGM
See OPERATING YOUR THERMO-
STAT.
• The compressor lockout feature is op-
erating; wait about 5 minutes for sys-
tem to begin running. See OPERAT-
ING YOUR THERMOSTAT.
33