White Rodgers 1F92W-71 Operation Manual page 21

NOTE
To operate properly in the AUTO mode, there
must be a minimum 1 F separation between
the highest heat temperature and the lowest
cool temperature (see diagram below).
79
COOLING TEMPERATURES
78
77
76
75
HEATING TEMPERATURES
74
Determine the time periods and heating and
cooling temperatures for your weekday pro-
gram. You must program 4 periods for each
day (MOR, DAY, EVE, and NHT). However,
you may use the same heating and cooling
DEAD BAND 1 F
temperatures for consecutive time periods.
You can choose start times, heating tempera-
tures, and cooling temperatures independently
for both weekday and weekend programs (for
example, you may select 5:00 AM and 70 as
the weekday MOR heating start time and
temperature, and choose 7:00 AM and 76 as
the weekday MOR cooling start time and
temperature). Use the following table to plan
your program time periods, and the tempera-
tures you want during each period. You may
also want to look at the sample program table
to get an idea of how the thermostat can be
programmed.
21